Close filters
 
from to
1 From 2
No results were found for the filter!
LEHLE MONO VOLUME S LEHLE MONO VOLUME S
Voltage Internally Boosted to 30V
To exploit the dynamics of tube amplifiers to the full, the input voltage of Lehle products bearing this symbol is rectified from the power supply socket, then filtered, stabilized and boosted to 30V.
Adjustable Gain
Adjustment of volume or distortion using a gain controller is a vital feature in many situations. The gain controllers on the corresponding Lehle products feature black anodized aluminium knobs set back into the housing so that they can be easily fingertip rotated but keep their settings during performances and transportation.
Magnetic Sensor
Potentiometers, which are usually installed in volume pedals, are always exposed to extreme wear and tear, so they deteriorate quickly. In order to keep the mechanical stress and thus the wear of the pedal as low as possible, a magnetic sensor, which uses the "Hall effect“, is installed in the Lehle Mono Volume instead of a potentiometer. In accelerators of modern cars this has long been standard: a magnet is moved, and a stationary Hall sensor measures very precisely the distance. The magnetic sensor is therefore not exposed to mechanical wear, making these solutions work very reliably.
MIDI interface via USB
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
Voltage controlled amplifier
VCAs are voltage controlled amplifiers. These are small electronic amplifiers for audio signals, that use a voltage to control the gain of the amplifier. In our volume pedals we are using these units instead of potentiometers to control the volume. This has several advantages: a much longer life span and stable input and output impedances over the entire control range. We are only using premium Blackmer® VCAs of the THAT corporation.
USB port
LEHLE products with an USB socket can be connected to a computer by means of this port. Updates, current supply and data transfer make a flexible integration in digital systems possible.
LEHLE DUAL EXPRESSION LEHLE DUAL EXPRESSION
Gold-plated Relays
the signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
Voltage Internally Doubled to 18V
To exploit the dynamics of tube amplifiers to the full, the input voltage of Lehle products bearing this symbol is rectified from the power supply socket, then filtered, stabilized and doubled to 18V.
Magnetic Sensor
Potentiometers, which are usually installed in volume pedals, are always exposed to extreme wear and tear, so they deteriorate quickly. In order to keep the mechanical stress and thus the wear of the pedal as low as possible, a magnetic sensor, which uses the "Hall effect“, is installed in the Lehle Mono Volume instead of a potentiometer. In accelerators of modern cars this has long been standard: a magnet is moved, and a stationary Hall sensor measures very precisely the distance. The magnetic sensor is therefore not exposed to mechanical wear, making these solutions work very reliably.
MIDI interface via USB
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
USB port
LEHLE products with an USB socket can be connected to a computer by means of this port. Updates, current supply and data transfer make a flexible integration in digital systems possible.
LEHLE P-ISO LEHLE P-ISO
LEHLE TRANSFORMER HZ
Hum loops and phase cancellations can occur as soon as the signal from an instrument is fed to more than one amp simultaneously. The one and only remedy for this is a high-quality transformer. Standard transformers modify the tone of electric guitars and basses very severely, since they are not designed to handle the low-strength high-impedance signals generated by instrument pickups. The Lehle LTHZ, on the other hand, has been specially conceived for use with these high-impedance signals, preserving instrument tone and the interaction between instrument and amp and eliminating hum loops.
Balanced Output
Equipped with a standard TRS-socket for balanced output signals if needed.
No Hum Loops
All Lehle products not featuring an LTHZ transformer and bearing this symbol switch the signal ground parallel to the signal itself via switches or relays with gold-plated contacts. Hum loops are thus effectively eliminated when switching backwards and forwards between different signal sources without, for example, simultaneous activation of two amps.
LEHLE P-SPLIT III LEHLE P-SPLIT III
Gold-plated Switches
The signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
LEHLE TRANSFORMER HZ
Hum loops and phase cancellations can occur as soon as the signal from an instrument is fed to more than one amp simultaneously. The one and only remedy for this is a high-quality transformer. Standard transformers modify the tone of electric guitars and basses very severely, since they are not designed to handle the low-strength high-impedance signals generated by instrument pickups. The Lehle LTHZ, on the other hand, has been specially conceived for use with these high-impedance signals, preserving instrument tone and the interaction between instrument and amp and eliminating hum loops.
Balanced Output
Equipped with a standard TRS-socket for balanced output signals if needed.
No Hum Loops
All Lehle products not featuring an LTHZ transformer and bearing this symbol switch the signal ground parallel to the signal itself via switches or relays with gold-plated contacts. Hum loops are thus effectively eliminated when switching backwards and forwards between different signal sources without, for example, simultaneous activation of two amps.
LEHLE SUNDAY DRIVER II LEHLE SUNDAY DRIVER II
Gold-plated Switches
The signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
Voltage Internally Boosted to 30V
To exploit the dynamics of tube amplifiers to the full, the input voltage of Lehle products bearing this symbol is rectified from the power supply socket, then filtered, stabilized and boosted to 30V.
Adjustable Gain
Adjustment of volume or distortion using a gain controller is a vital feature in many situations. The gain controllers on the corresponding Lehle products feature black anodized aluminium knobs set back into the housing so that they can be easily fingertip rotated but keep their settings during performances and transportation.
Balanced Output
Equipped with a standard TRS-socket for balanced output signals if needed.
LEHLE SUNDAY DRIVER SW II LEHLE SUNDAY DRIVER SW II
Gold-plated Relays & Switches
The signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
Switching precise, swift and quiet
Swift and precise switching as between different instruments, effects loops or amps is essential in many live setups. To ensure this almost silently and wear-free, we have designed a finely tuned control system with a self developed spring located between the foot switch, our famous mushroom head, and the actual sensing device on the circuit board. A processor based on the ARM Cortex-M technology controls the switching operation very fast and precisely. While a conventional switch can handle a maximum of 20,000 switching operations, the interplay of the components used here enables a service life of 2 million switching operations. A hundred times more!
LEHLE Footswitch
The easy-action mushroom-shaped buttons characteristic of LEHLE products are mounted in the cover, so that your foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making your LEHLE virtually indestructible and guaranteeing years of trouble-free switching.
Voltage Internally Boosted to 30V
To exploit the dynamics of tube amplifiers to the full, the input voltage of Lehle products bearing this symbol is rectified from the power supply socket, then filtered, stabilized and boosted to 30V.
Adjustable Gain
Adjustment of volume or distortion using a gain controller is a vital feature in many situations. The gain controllers on the corresponding Lehle products feature black anodized aluminium knobs set back into the housing so that they can be easily fingertip rotated but keep their settings during performances and transportation.
LITTLE LEHLE III LITTLE LEHLE III
Gold-plated Relays & Switches
The signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
Switching precise, swift and quiet
Swift and precise switching as between different instruments, effects loops or amps is essential in many live setups. To ensure this almost silently and wear-free, we have designed a finely tuned control system with a self developed spring located between the foot switch, our famous mushroom head, and the actual sensing device on the circuit board. A processor based on the ARM Cortex-M technology controls the switching operation very fast and precisely. While a conventional switch can handle a maximum of 20,000 switching operations, the interplay of the components used here enables a service life of 2 million switching operations. A hundred times more!
LEHLE Footswitch
The easy-action mushroom-shaped buttons characteristic of LEHLE products are mounted in the cover, so that your foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making your LEHLE virtually indestructible and guaranteeing years of trouble-free switching.
Stereo
Many effects units feature stereo outputs. Or: instruments frequently have two pickup systems, e.g. a combination of conventional magnetic and Piezo types, to emulate an acoustic sound. Lehle accessories are ideal for trouble-free routing of such dual-channel stereo signals. All stereo-capable Lehle products are, of course, also suitable for mono operation.
Mono-to-stereo-switch
Integrate an effects pedal with a mono input and stereo output into the signal path.
No Hum Loops
All Lehle products not featuring an LTHZ transformer and bearing this symbol switch the signal ground parallel to the signal itself via switches or relays with gold-plated contacts. Hum loops are thus effectively eliminated when switching backwards and forwards between different signal sources without, for example, simultaneous activation of two amps.
LEHLE PARALLEL SW II LEHLE PARALLEL SW II
Gold-plated Relays & Switches
The signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
Switching precise, swift and quiet
Swift and precise switching as between different instruments, effects loops or amps is essential in many live setups. To ensure this almost silently and wear-free, we have designed a finely tuned control system with a self developed spring located between the foot switch, our famous mushroom head, and the actual sensing device on the circuit board. A processor based on the ARM Cortex-M technology controls the switching operation very fast and precisely. While a conventional switch can handle a maximum of 20,000 switching operations, the interplay of the components used here enables a service life of 2 million switching operations. A hundred times more!
LEHLE Footswitch
The easy-action mushroom-shaped buttons characteristic of LEHLE products are mounted in the cover, so that your foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making your LEHLE virtually indestructible and guaranteeing years of trouble-free switching.
Voltage Internally Boosted to 30V
To exploit the dynamics of tube amplifiers to the full, the input voltage of Lehle products bearing this symbol is rectified from the power supply socket, then filtered, stabilized and boosted to 30V.
Adjustable Gain
Adjustment of volume or distortion using a gain controller is a vital feature in many situations. The gain controllers on the corresponding Lehle products feature black anodized aluminium knobs set back into the housing so that they can be easily fingertip rotated but keep their settings during performances and transportation.
Stereo
Many effects units feature stereo outputs. Or: instruments frequently have two pickup systems, e.g. a combination of conventional magnetic and Piezo types, to emulate an acoustic sound. Lehle accessories are ideal for trouble-free routing of such dual-channel stereo signals. All stereo-capable Lehle products are, of course, also suitable for mono operation.
Mono-to-stereo-switch
Integrate an effects pedal with a mono input and stereo output into the signal path.
LEHLE LITTLE DUAL II LEHLE LITTLE DUAL II
Gold-plated Relays & Switches
The signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
LEHLE TRANSFORMER HZ
Hum loops and phase cancellations can occur as soon as the signal from an instrument is fed to more than one amp simultaneously. The one and only remedy for this is a high-quality transformer. Standard transformers modify the tone of electric guitars and basses very severely, since they are not designed to handle the low-strength high-impedance signals generated by instrument pickups. The Lehle LTHZ, on the other hand, has been specially conceived for use with these high-impedance signals, preserving instrument tone and the interaction between instrument and amp and eliminating hum loops.
Switching precise, swift and quiet
Swift and precise switching as between different instruments, effects loops or amps is essential in many live setups. To ensure this almost silently and wear-free, we have designed a finely tuned control system with a self developed spring located between the foot switch, our famous mushroom head, and the actual sensing device on the circuit board. A processor based on the ARM Cortex-M technology controls the switching operation very fast and precisely. While a conventional switch can handle a maximum of 20,000 switching operations, the interplay of the components used here enables a service life of 2 million switching operations. A hundred times more!
LEHLE Footswitch
The easy-action mushroom-shaped buttons characteristic of LEHLE products are mounted in the cover, so that your foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making your LEHLE virtually indestructible and guaranteeing years of trouble-free switching.
Stereo
Many effects units feature stereo outputs. Or: instruments frequently have two pickup systems, e.g. a combination of conventional magnetic and Piezo types, to emulate an acoustic sound. Lehle accessories are ideal for trouble-free routing of such dual-channel stereo signals. All stereo-capable Lehle products are, of course, also suitable for mono operation.
Balanced Output
Equipped with a standard TRS-socket for balanced output signals if needed.
No Hum Loops
All Lehle products not featuring an LTHZ transformer and bearing this symbol switch the signal ground parallel to the signal itself via switches or relays with gold-plated contacts. Hum loops are thus effectively eliminated when switching backwards and forwards between different signal sources without, for example, simultaneous activation of two amps.
LEHLE MONO VOLUME 90 LEHLE MONO VOLUME 90
Voltage Internally Doubled to 18V
To exploit the dynamics of tube amplifiers to the full, the input voltage of Lehle products bearing this symbol is rectified from the power supply socket, then filtered, stabilized and doubled to 18V.
Adjustable Gain
Adjustment of volume or distortion using a gain controller is a vital feature in many situations. The gain controllers on the corresponding Lehle products feature black anodized aluminium knobs set back into the housing so that they can be easily fingertip rotated but keep their settings during performances and transportation.
Magnetic Sensor
Potentiometers, which are usually installed in volume pedals, are always exposed to extreme wear and tear, so they deteriorate quickly. In order to keep the mechanical stress and thus the wear of the pedal as low as possible, a magnetic sensor, which uses the "Hall effect“, is installed in the Lehle Mono Volume instead of a potentiometer. In accelerators of modern cars this has long been standard: a magnet is moved, and a stationary Hall sensor measures very precisely the distance. The magnetic sensor is therefore not exposed to mechanical wear, making these solutions work very reliably.
Voltage controlled amplifier
VCAs are voltage controlled amplifiers. These are small electronic amplifiers for audio signals, that use a voltage to control the gain of the amplifier. In our volume pedals we are using these units instead of potentiometers to control the volume. This has several advantages: a much longer life span and stable input and output impedances over the entire control range. We are only using premium Blackmer® VCAs of the THAT corporation.
LEHLE STEREO VOLUME LEHLE STEREO VOLUME
Voltage Internally Doubled to 18V
To exploit the dynamics of tube amplifiers to the full, the input voltage of Lehle products bearing this symbol is rectified from the power supply socket, then filtered, stabilized and doubled to 18V.
Magnetic Sensor
Potentiometers, which are usually installed in volume pedals, are always exposed to extreme wear and tear, so they deteriorate quickly. In order to keep the mechanical stress and thus the wear of the pedal as low as possible, a magnetic sensor, which uses the "Hall effect“, is installed in the Lehle Mono Volume instead of a potentiometer. In accelerators of modern cars this has long been standard: a magnet is moved, and a stationary Hall sensor measures very precisely the distance. The magnetic sensor is therefore not exposed to mechanical wear, making these solutions work very reliably.
Stereo
Many effects units feature stereo outputs. Or: instruments frequently have two pickup systems, e.g. a combination of conventional magnetic and Piezo types, to emulate an acoustic sound. Lehle accessories are ideal for trouble-free routing of such dual-channel stereo signals. All stereo-capable Lehle products are, of course, also suitable for mono operation.
Balanced Output
Equipped with a standard TRS-socket for balanced output signals if needed.
LEHLE MONO VOLUME LEHLE MONO VOLUME
Voltage Internally Doubled to 18V
To exploit the dynamics of tube amplifiers to the full, the input voltage of Lehle products bearing this symbol is rectified from the power supply socket, then filtered, stabilized and doubled to 18V.
Adjustable Gain
Adjustment of volume or distortion using a gain controller is a vital feature in many situations. The gain controllers on the corresponding Lehle products feature black anodized aluminium knobs set back into the housing so that they can be easily fingertip rotated but keep their settings during performances and transportation.
Magnetic Sensor
Potentiometers, which are usually installed in volume pedals, are always exposed to extreme wear and tear, so they deteriorate quickly. In order to keep the mechanical stress and thus the wear of the pedal as low as possible, a magnetic sensor, which uses the "Hall effect“, is installed in the Lehle Mono Volume instead of a potentiometer. In accelerators of modern cars this has long been standard: a magnet is moved, and a stationary Hall sensor measures very precisely the distance. The magnetic sensor is therefore not exposed to mechanical wear, making these solutions work very reliably.
Voltage controlled amplifier
VCAs are voltage controlled amplifiers. These are small electronic amplifiers for audio signals, that use a voltage to control the gain of the amplifier. In our volume pedals we are using these units instead of potentiometers to control the volume. This has several advantages: a much longer life span and stable input and output impedances over the entire control range. We are only using premium Blackmer® VCAs of the THAT corporation.
LEHLE DUAL SGOS LEHLE DUAL SGOS
Gold-plated Relays & Switches
The signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
LEHLE TRANSFORMER HZ
Hum loops and phase cancellations can occur as soon as the signal from an instrument is fed to more than one amp simultaneously. The one and only remedy for this is a high-quality transformer. Standard transformers modify the tone of electric guitars and basses very severely, since they are not designed to handle the low-strength high-impedance signals generated by instrument pickups. The Lehle LTHZ, on the other hand, has been specially conceived for use with these high-impedance signals, preserving instrument tone and the interaction between instrument and amp and eliminating hum loops.
LEHLE Footswitch
The easy-action mushroom-shaped buttons characteristic of LEHLE products are mounted in the cover, so that your foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making your LEHLE virtually indestructible and guaranteeing years of trouble-free switching.
Adjustable Gain
Adjustment of volume or distortion using a gain controller is a vital feature in many situations. The gain controllers on the corresponding Lehle products feature black anodized aluminium knobs set back into the housing so that they can be easily fingertip rotated but keep their settings during performances and transportation.
MIDI interface
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
Stereo
Many effects units feature stereo outputs. Or: instruments frequently have two pickup systems, e.g. a combination of conventional magnetic and Piezo types, to emulate an acoustic sound. Lehle accessories are ideal for trouble-free routing of such dual-channel stereo signals. All stereo-capable Lehle products are, of course, also suitable for mono operation.
Balanced Output
Equipped with a standard TRS-socket for balanced output signals if needed.
No Hum Loops
All Lehle products not featuring an LTHZ transformer and bearing this symbol switch the signal ground parallel to the signal itself via switches or relays with gold-plated contacts. Hum loops are thus effectively eliminated when switching backwards and forwards between different signal sources without, for example, simultaneous activation of two amps.
LEHLE 1AT3 SGOS LEHLE 1AT3 SGOS
Gold-plated Relays & Switches
The signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
Switching precise, swift and quiet
Swift and precise switching as between different instruments, effects loops or amps is essential in many live setups. To ensure this almost silently and wear-free, we have designed a finely tuned control system with a self developed spring located between the foot switch, our famous mushroom head, and the actual sensing device on the circuit board. A processor based on the ARM Cortex-M technology controls the switching operation very fast and precisely. While a conventional switch can handle a maximum of 20,000 switching operations, the interplay of the components used here enables a service life of 2 million switching operations. A hundred times more!
LEHLE Footswitch
The easy-action mushroom-shaped buttons characteristic of LEHLE products are mounted in the cover, so that your foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making your LEHLE virtually indestructible and guaranteeing years of trouble-free switching.
MIDI interface
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
No Hum Loops
All Lehle products not featuring an LTHZ transformer and bearing this symbol switch the signal ground parallel to the signal itself via switches or relays with gold-plated contacts. Hum loops are thus effectively eliminated when switching backwards and forwards between different signal sources without, for example, simultaneous activation of two amps.
LEHLE 3AT1 SGOS LEHLE 3AT1 SGOS
Gold-plated Relays
the signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
Switching precise, swift and quiet
Swift and precise switching as between different instruments, effects loops or amps is essential in many live setups. To ensure this almost silently and wear-free, we have designed a finely tuned control system with a self developed spring located between the foot switch, our famous mushroom head, and the actual sensing device on the circuit board. A processor based on the ARM Cortex-M technology controls the switching operation very fast and precisely. While a conventional switch can handle a maximum of 20,000 switching operations, the interplay of the components used here enables a service life of 2 million switching operations. A hundred times more!
LEHLE Footswitch
The easy-action mushroom-shaped buttons characteristic of LEHLE products are mounted in the cover, so that your foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making your LEHLE virtually indestructible and guaranteeing years of trouble-free switching.
Adjustable Gain
Adjustment of volume or distortion using a gain controller is a vital feature in many situations. The gain controllers on the corresponding Lehle products feature black anodized aluminium knobs set back into the housing so that they can be easily fingertip rotated but keep their settings during performances and transportation.
MIDI interface
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
Stereo
Many effects units feature stereo outputs. Or: instruments frequently have two pickup systems, e.g. a combination of conventional magnetic and Piezo types, to emulate an acoustic sound. Lehle accessories are ideal for trouble-free routing of such dual-channel stereo signals. All stereo-capable Lehle products are, of course, also suitable for mono operation.
LEHLE D.LOOP SGOS LEHLE D.LOOP SGOS
Gold-plated Relays
the signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
Switching precise, swift and quiet
Swift and precise switching as between different instruments, effects loops or amps is essential in many live setups. To ensure this almost silently and wear-free, we have designed a finely tuned control system with a self developed spring located between the foot switch, our famous mushroom head, and the actual sensing device on the circuit board. A processor based on the ARM Cortex-M technology controls the switching operation very fast and precisely. While a conventional switch can handle a maximum of 20,000 switching operations, the interplay of the components used here enables a service life of 2 million switching operations. A hundred times more!
LEHLE Footswitch
The easy-action mushroom-shaped buttons characteristic of LEHLE products are mounted in the cover, so that your foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making your LEHLE virtually indestructible and guaranteeing years of trouble-free switching.
Adjustable Gain
Adjustment of volume or distortion using a gain controller is a vital feature in many situations. The gain controllers on the corresponding Lehle products feature black anodized aluminium knobs set back into the housing so that they can be easily fingertip rotated but keep their settings during performances and transportation.
MIDI interface
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
Stereo
Many effects units feature stereo outputs. Or: instruments frequently have two pickup systems, e.g. a combination of conventional magnetic and Piezo types, to emulate an acoustic sound. Lehle accessories are ideal for trouble-free routing of such dual-channel stereo signals. All stereo-capable Lehle products are, of course, also suitable for mono operation.
No Hum Loops
All Lehle products not featuring an LTHZ transformer and bearing this symbol switch the signal ground parallel to the signal itself via switches or relays with gold-plated contacts. Hum loops are thus effectively eliminated when switching backwards and forwards between different signal sources without, for example, simultaneous activation of two amps.
LEHLE MIDI-KABEL SGOS DIN-TRS 0,3m LEHLE MIDI-KABEL SGOS DIN-TRS 0,3m
MIDI interface
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
LEHLE MIDI-KABEL SGOS DIN-TRS 0,6m LEHLE MIDI-KABEL SGOS DIN-TRS 0,6m
MIDI interface
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
LEHLE MIDI-KABEL SGOS DIN-TRS 1m LEHLE MIDI-KABEL SGOS DIN-TRS 1m
MIDI interface
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
LEHLE MIDI-KABEL SGOS DIN-TRS 3m LEHLE MIDI-KABEL SGOS DIN-TRS 3m
MIDI interface
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
LEHLE MIDI-KABEL SGOS DIN-TRS 6m LEHLE MIDI-KABEL SGOS DIN-TRS 6m
MIDI interface
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
LEHLE DC-FILTER LEHLE DC-FILTER
Stereo
Many effects units feature stereo outputs. Or: instruments frequently have two pickup systems, e.g. a combination of conventional magnetic and Piezo types, to emulate an acoustic sound. Lehle accessories are ideal for trouble-free routing of such dual-channel stereo signals. All stereo-capable Lehle products are, of course, also suitable for mono operation.
Balanced Output
Equipped with a standard TRS-socket for balanced output signals if needed.
LEHLE MIDI JUNCTION LEHLE MIDI JUNCTION
MIDI interface
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
1 From 2