LEHLE P-SPLIT STEREO

239,00 € *

Prix avec la TVA plus frais de port

Numéro d'article : 1046

Expédié dès aujourd'hui,
livraison sous env. 1 à 3 jours ouvrables

• Stereo split, summing, double DI box and problem solver • Hum-free and lossless splitting and... mehr
Commutateurs à contacts en or
Le niveau du signal provenant des micros d'une guitare ou d'une basse électrique est tellement faible que les câbles de mauvaise qualité, les soudures incorrectes et les matériaux de contact de mauvaise qualité affectent le son de façon audible. Pour pouvoir commuter ces signaux de niveau réduit sans perte d'informations audio, les contacts des commutateurs doivent être fabriqués avec des matériaux spéciaux. Toutes les Switchers Lehle utilisent des relais et des commutateurs spéciaux à contacts en or qui garantissent une commutation absolument fiable et sans perte de signal.
LEHLE TRANSFORMER HZ
Des boucles de masse et des problèmes de phase peuvent apparaître dès que le signal d'un instrument est réparti simultanément sur plusieurs amplis. Il n'existe qu'une façon de remédier efficacement à ce problème : utiliser un transformateur de haute qualité. Les transformateurs classiques modifient fortement le son des guitares et des basses électriques parce qu'ils ne sont pas conçus pour le signal à haute impédance et faible niveau de leurs micros. Le Lehle LTHZ a été développé spécialement pour ces signaux à haute impédance de sorte que les boucles de masse soient exclues, tout en préservant le son de l'instrument et de l'ampli ainsi que leur interaction.
Stéréo
Beaucoup de processeurs d'effets ont des sorties stéréo. De même, certains instruments possèdent deux types de micros séparés, par exemple des micros magnétiques classiques et un capteur piezo pour le son acoustique. On peut gérer sans problème ces signaux stéréo ou deux canaux en choisissant les solutions Lehle adaptées. Bien entendu, tous les produits Lehle stéréo sont aussi utilisables en mono.
Sortie symétrique
Ce produit est équipé d'un connecteur jack TRS standard et délivre, au besoin, un signal de sortie symétrique.
Pas de boucles de masse
Tous les produits Lehle qui n'utilisent pas le transformateur LTHZ et portent ce sigle commutent la masse du signal à l'aide de commutateurs ou de relais à contacts en or parallèles au signal. Ainsi, le bruit indésirable généré par les boucles de masse est supprimé efficacement quand on commute alternativement d'une source de signal à l'autre sans que, par exemple, deux amplis soient actifs en même temps.

• Stereo split, summing, double DI box and problem solver
• Hum-free and lossless splitting and isolating
• Two high-impedance LEHLE TRANSFORMER HZ
• Phase and ground switch per channel
• Suitable for unbalanced or balanced signals
• Passive – doesn’t need power

The LEHLE P-SPLIT STEREO combines passive intelligent splitting with the highest possible signal fidelity in a double pack.
The classic solution for splitting, eliminating hum, balancing and reamplification in recording applications, now appears in a doubled version and this time adds the passive summing of signals.
The possibilities are reaching far. Tap the full potential.
Two LEHLE TRANSFORMER HZ are working at the heart of the LEHLE P-SPLIT STEREO, galvanically isolating the particular ISO outputs from each other, eliminating any possibility of ground loops and hum.
The LEHLE TRANSFORMER HZ process both high and low impedance with uncompromising sound quality. At the ISO outputs you can pick off the signal either unbalanced or balanced –  regardless of the signal type in the rest of your rig.
Per channel there is a gold plated phase switch and ground switch. This keeps you flexible and your system safe.
A classic application is the isolation of a stereo signal, enabling you to use two amplifiers in stereo and send the stereo signal to a mixer or the audio interface of your DAW at the same time.
Another useful method for the LEHLE P-SPLIT STEREO can be as an effective hum suppressor.
If you connect two electronic devices, background noise can appear, caused by ground loops.
Here the LEHLE P-SPLIT STEREO provides a simple, but highly effective solution: whilst installed between the two units, this problem solver isolates the input from the output.
Thanks to its ability to pick off balanced signals on the ISO outputs, the LEHLE P-SPLIT STEREO is also eminently suitable for use as a high-quality compact stereo DI box for all types of active signals.
Thus you can run long cable distances in the studio or on stage, of balanced signal type and free of background noise.
According to which sockets are occupied, the LEHLE P-SPLIT STEREO also works as a passive summing box: your effects pedal board can be wired in stereo, but you output in mono if connected to only one amplifier.
If, on the other hand, you connect only one mono signal to the input, the LEHLE P-SPLIT STEREO works as a three-way split for up to three amplifiers.
Galvanically isolated, double hum free and passively intelligent splitting
Speaking of passive: the LEHLE P-SPLIT STEREO still doesn’t need a power supply.

Q: What is galvanic isolation?
A: Background noise, generated by ground loops, occurs again and again when two electronic devices are connected to each other, and the Lehle P-Split III provides a simple but extremely effective remedy when installed between the two units. The two devices are galvanically isolated when the `ISO´ output is used, eliminating this background noise.
The protective earth conductor and the ground connection of the audio signal create a loop which will pick up external interference generated, for example, by coils. Such interference will impair the signal. The Lehle LTHZ transformer included in the Lehle P-Split III galvanically isolates the ground connection. The hum loop is thus broken at this point.

Q: Does the galvanic isolation color my sound?
A: No, neither sound nor dynamics will be altered, the signal is passing the switcher without any loss in strength or frequency. We use our self-developed Lehle LTHZ transformers for this, the selection of high quality components guarantees a rich sound throughout the full frequency range.

Q: Can I use the P-Split III to eliminate the humming that my amps create when I use them simultaneously? It sometimes occurs when I use a stereo pedal to send a signal to both amps.
A: Yes, the 2 outputs are galvanically isolated, so there will be no ground loops.

Q: Can the P-Split III be used as DI box since it has 14“ sockets?
A: Yes, you get a balanced or unbalanced (mono-) signal from ISO and/or DIR output when using a stereo (TRS) cable.

 

Guitar 2023-08
Robin Ehrlich
The troubleshooter
For Professionals and people expecting high standards of the signal’s purity and fidelity, the LEHLE P-SPLIT STEREO is recommended beyond any doubt. Every purpose the manufacturer promised, is accomplished by the device with impressed efficiency and can be operated easily at the same time. Since there is no need for a current supply, it can be implemented quick and flexible in any signal path.
Bonedo 2023-06
Lire le banc d'essai complet
Haiko Heinz
Lehle P-Split Stereo Test
The P-SPLIT STEREO is even more than a pure split, because it can take over a lot of useful tasks in the guitar setup […] every application the manufacturer promised, was able to be realised easily. The field of application is boundless and exceeds the simple splitting function by far. Especially user building complex setups with stereo signals or multiple amps, get a versatile solution for specific scenarios.
Weight 614 g
Length 88 mm
Width 152 mm
Overall height 35 mm
Max Level +20 dBu (THD < 1%, 50 Hz - 20 kHz)
Total harmonic distortion 0.003 % (0 dBu, 1 kHz)
Frequency range 20 Hz – 100 kHz -0.1/ +0.4 dB
(source 600 Ω, load 1 MΩ)
Input impedance
(transformer load impedance)
min. 2 MΩ at 2 kHz

Demande à Joki

Les champs marqués d'un astérisque sont obligatoires.

Joki Schaller Tel +49 2855 850070