Close filters
 
from to
No results were found for the filter!
LITTLE LEHLE III LITTLE LEHLE III
Gold-plated Relays & Switches
The signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
Switching precise, swift and quiet
Swift and precise switching as between different instruments, effects loops or amps is essential in many live setups. To ensure this almost silently and wear-free, we have designed a finely tuned control system with a self developed spring located between the foot switch, our famous mushroom head, and the actual sensing device on the circuit board. A processor based on the ARM Cortex-M technology controls the switching operation very fast and precisely. While a conventional switch can handle a maximum of 20,000 switching operations, the interplay of the components used here enables a service life of 2 million switching operations. A hundred times more!
LEHLE Footswitch
The easy-action mushroom-shaped buttons characteristic of LEHLE products are mounted in the cover, so that your foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making your LEHLE virtually indestructible and guaranteeing years of trouble-free switching.
Stereo
Many effects units feature stereo outputs. Or: instruments frequently have two pickup systems, e.g. a combination of conventional magnetic and Piezo types, to emulate an acoustic sound. Lehle accessories are ideal for trouble-free routing of such dual-channel stereo signals. All stereo-capable Lehle products are, of course, also suitable for mono operation.
Mono-to-stereo-switch
Integrate an effects pedal with a mono input and stereo output into the signal path.
No Hum Loops
All Lehle products not featuring an LTHZ transformer and bearing this symbol switch the signal ground parallel to the signal itself via switches or relays with gold-plated contacts. Hum loops are thus effectively eliminated when switching backwards and forwards between different signal sources without, for example, simultaneous activation of two amps.
LEHLE PARALLEL SW II LEHLE PARALLEL SW II
Gold-plated Relays & Switches
The signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
Switching precise, swift and quiet
Swift and precise switching as between different instruments, effects loops or amps is essential in many live setups. To ensure this almost silently and wear-free, we have designed a finely tuned control system with a self developed spring located between the foot switch, our famous mushroom head, and the actual sensing device on the circuit board. A processor based on the ARM Cortex-M technology controls the switching operation very fast and precisely. While a conventional switch can handle a maximum of 20,000 switching operations, the interplay of the components used here enables a service life of 2 million switching operations. A hundred times more!
LEHLE Footswitch
The easy-action mushroom-shaped buttons characteristic of LEHLE products are mounted in the cover, so that your foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making your LEHLE virtually indestructible and guaranteeing years of trouble-free switching.
Voltage Internally Boosted to 30V
To exploit the dynamics of tube amplifiers to the full, the input voltage of Lehle products bearing this symbol is rectified from the power supply socket, then filtered, stabilized and boosted to 30V.
Adjustable Gain
Adjustment of volume or distortion using a gain controller is a vital feature in many situations. The gain controllers on the corresponding Lehle products feature black anodized aluminium knobs set back into the housing so that they can be easily fingertip rotated but keep their settings during performances and transportation.
Stereo
Many effects units feature stereo outputs. Or: instruments frequently have two pickup systems, e.g. a combination of conventional magnetic and Piezo types, to emulate an acoustic sound. Lehle accessories are ideal for trouble-free routing of such dual-channel stereo signals. All stereo-capable Lehle products are, of course, also suitable for mono operation.
Mono-to-stereo-switch
Integrate an effects pedal with a mono input and stereo output into the signal path.
LEHLE 1AT3 SGOS LEHLE 1AT3 SGOS
Gold-plated Relays & Switches
The signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
Switching precise, swift and quiet
Swift and precise switching as between different instruments, effects loops or amps is essential in many live setups. To ensure this almost silently and wear-free, we have designed a finely tuned control system with a self developed spring located between the foot switch, our famous mushroom head, and the actual sensing device on the circuit board. A processor based on the ARM Cortex-M technology controls the switching operation very fast and precisely. While a conventional switch can handle a maximum of 20,000 switching operations, the interplay of the components used here enables a service life of 2 million switching operations. A hundred times more!
LEHLE Footswitch
The easy-action mushroom-shaped buttons characteristic of LEHLE products are mounted in the cover, so that your foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making your LEHLE virtually indestructible and guaranteeing years of trouble-free switching.
MIDI interface
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
No Hum Loops
All Lehle products not featuring an LTHZ transformer and bearing this symbol switch the signal ground parallel to the signal itself via switches or relays with gold-plated contacts. Hum loops are thus effectively eliminated when switching backwards and forwards between different signal sources without, for example, simultaneous activation of two amps.
LEHLE D.LOOP SGOS LEHLE D.LOOP SGOS
Gold-plated Relays
the signal from the pickups of an electric guitar or bass is so weak that poor-quality cables, cold joints and cheap contact materials ruin your sound. Switch contacts need to be made of special materials to permit loss-free switching of these low-level signals. All Lehle switchers feature special relays and slide switches with gold-plated contacts for totally reliable, absolutely zero-loss switching.
Switching precise, swift and quiet
Swift and precise switching as between different instruments, effects loops or amps is essential in many live setups. To ensure this almost silently and wear-free, we have designed a finely tuned control system with a self developed spring located between the foot switch, our famous mushroom head, and the actual sensing device on the circuit board. A processor based on the ARM Cortex-M technology controls the switching operation very fast and precisely. While a conventional switch can handle a maximum of 20,000 switching operations, the interplay of the components used here enables a service life of 2 million switching operations. A hundred times more!
LEHLE Footswitch
The easy-action mushroom-shaped buttons characteristic of LEHLE products are mounted in the cover, so that your foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making your LEHLE virtually indestructible and guaranteeing years of trouble-free switching.
Adjustable Gain
Adjustment of volume or distortion using a gain controller is a vital feature in many situations. The gain controllers on the corresponding Lehle products feature black anodized aluminium knobs set back into the housing so that they can be easily fingertip rotated but keep their settings during performances and transportation.
MIDI interface
By means of the MIDI interface, control information can be exchanged. All LEHLE products with the MIDI symbol are able to be networked with external equipment, in order to control it and/or be controlled.
Stereo
Many effects units feature stereo outputs. Or: instruments frequently have two pickup systems, e.g. a combination of conventional magnetic and Piezo types, to emulate an acoustic sound. Lehle accessories are ideal for trouble-free routing of such dual-channel stereo signals. All stereo-capable Lehle products are, of course, also suitable for mono operation.
No Hum Loops
All Lehle products not featuring an LTHZ transformer and bearing this symbol switch the signal ground parallel to the signal itself via switches or relays with gold-plated contacts. Hum loops are thus effectively eliminated when switching backwards and forwards between different signal sources without, for example, simultaneous activation of two amps.