LEHLE SWITCH BTN-C
The LEHLE SWITCH BTN-C is technically identical to the LEHLE SWITCH BTN. At the end of the leads is a 2-pin PCB connector. Thus, it can be installed easily without soldering e.g. into Strymon pedals.
I have the following questions on the product LEHLE SWITCH BTN-C (Order code: 3002)
Q: Can I replace any footswitch with the LEHLE SWITCH BTN-C?
A:
The LEHLE SWITCH BTN-C can replace any momentary switch with 2
connectors which is normally "open". It works well for pedals like
Strymon which have a 2-pin-connector.
Q: Which Strymon pedals are qualified for the LEHLE SWITCH BTN-C?
A:
All Strymon pedals whose foot switches are connected via a
2-pin-connector. The older pedals (V1 with no-clickless switches) are
not qualified for the LEHLE SWITCH BTN-C.
Q: Does the switch make a loud click when pressed?
A:
No. There's a soft click, unlike most other switches or buttons.
Q: Can I send you my effects pedals to modify?
A:
Unfortunately we don't offer this service. But we can direct you to some
of our friends who can modify your pedal with the LEHLE SWITCH BTN-C.
Q: What's the diameter of the LEHLE SWITCH BTN-C?
A: The LEHLE SWITCH BTN-C has a M12 enclosure, so 12 mm (0.47 inch). You'll find more specifications on page 3 of the data sheet.
Q: Can I replace any footswitch with the LEHLE SWITCH BTN-C?
A:
The LEHLE SWITCH BTN-C can replace any momentary switch with 2
connectors which is normally "open". It works well for pedals like
Strymon which have a 2-pin-connector.
Q: Which Strymon pedals are qualified for the LEHLE SWITCH BTN-C?
A:
All Strymon pedals whose foot switches are connected via a
2-pin-connector. The older pedals (V1 with no-clickless switches) are
not qualified for the LEHLE SWITCH BTN-C.
Q: Does the switch make a loud click when pressed?
A:
No. There's a soft click, unlike most other switches or buttons.
Q: Can I send you my effects pedals to modify?
A:
Unfortunately we don't offer this service. But we can direct you to some
of our friends who can modify your pedal with the LEHLE SWITCH BTN-C.
Q: What's the diameter of the LEHLE SWITCH BTN-C?
A: The LEHLE SWITCH BTN-C has a M12 enclosure, so 12 mm (0.47 inch). You'll find more specifications on page 3 of the data sheet.